|
جزئیات محصول:
پرداخت:
|
| برجسته: | Induction welding machine , Induction heating machine , Induction brazing machine,Induction heating machine,Induction brazing machine |
||
|---|---|---|---|
JL-15 High Frequency Induction welding machine
1.Advance MOS,IGBT technology.
2.High frequency:30-100KHZ.
3.Safety operation.
JL-15 High Frequency Induction welding machine
Main characteristics:
1. Adoping MOSFGT and IGBT inverting device, tracking frequency automatically
2. High frequency, heated quickly, its powei consumption is only 20%~30% of eletronic tube induction heating machine and other heating style.
3. Security and reliability, the equipments have the secure voltage and it's secure to operate
4. Manual, automatic regulating automatically, it can protect itself from over voltage, over current, lack of water, phase fail, over hot, etc
5. It has no open-fire, noise and pollution, be suit for the environmental protection and fire, improve the image of the company
6. Recommend usage: Weld, forging, hot cooperate, melting, quenching, anneat etc
Specifications:
Model | JL-15KW | |
Input power desire | Single phase 220V 50-60HZ | |
Oscillate power max | 15KW | |
Oscillate frequency | 30-100KHZ | |
Cooling Water desire | >0.2MPa 2-5L/Min | |
Duty cycle | 80% 30°C | |
Cubage | Generator | 460x200x385mm |
Transformer | ||
Net Weight | 25kg | |
Cable length | 2-6(Meters) | |
Packing | Wooden case | |
Time of shipment | WITHIN 10 DAYS AFTER RECEIPT OF YOUR 100% T/T | |
Our Jinlai Induction Heating Machine is divided into four series according to output frequency:
1)Medium Frequency Series(JLZ): 1KHZ-20KHZ
2)Ultrasonic Frequency Series (JLC) : 10KHZ-30KHZ
3)High Frequency Series (JL) : 30KHZ-100KHZ
4)Ultrahigh Frequency (JLCG) : 100KHZ-1.1MHZ
Definition | Scope of application | Selection of Frequency | Selection of power | |
Heat Penetration | Trough induction heating to make the internal temperature of heated parts to be equal to the surface temperature approximately. | Hot forging and hot rolling of fastener, hardware tool, automobile/motorcycle fittings, rigging, pipe fitting , twist drill | Bigger for workpiece, lower for selected frequency. e.g. bar forging | If workpiece diameter is bigger or heating required is quicker, the power selected will be higher φ16x40 fastener: JL-40 or JLZ-30 |
Brazing | Brazing is the process of joining two or more pieces of metal or cermic material with a molten filler metal such as silver, aluminum alloy or copper. Induction brazing is a new technology, it is characterized by good working condition , high production efficiency , safe operation , good joint appearance without acid cleaning and oxidation removing. | Diamond saw blade, hard alloy cutting tools(turning tool , milling cutter , drilling bit ), mould mining tools ( bore bit, coal puncheon ), compressor pipe fitting of refrigerator, cooper wire of transformer , induction brazing of cooper/silver/tin of automobile fittings. | The diameter of parts is smaller, the frequency is higher. The diameter of parts is bigger, the frequency is lower. e.g. Below 20 lathe tool, frequency range from 50-100KHZ Above 20 lathe tool, frequency range from 10-50KHZ. | The heated area of base metal is bigger, the power is higher. The heating cycle of the individual is faster, the power is higher. e.g. Brazing of diamond circular saw blade: JL-5 or JL-15 |
Heat Treatment | Heat treating is controlled heating and cooling of a metal or alloy to change its crystal structure while maintaining its shape, and then the metal obtains different mechanical properties. e.g. Hardening, annealing, normalizing and tempering | Hardening and annealing of gear, arbor wheel, chain gear, guide rail of machine tool , hardware tools, cooper wires, cooper belt, stainless steel and automobile/ motorcycle fittings. | Frequency of hardening depends on the depth of quenching layer: the depth is deeper, the frequency is lower; the depth is lower, the frequency is higher. | The hardening area is bigger, the power is higher; the hardening area is smaller , the power is lower. The hardening depth is lower, the power is higher; the hardening depth is deeper, the power is lower. e.g. Hardening of φ20 axis surface: JL-40 |
Melting | Heating metals in a non-conductive crucible to enable the metal being melted down to liquid form | Melting of gold, silver, cooper, aluminum, steel,iron etc | Selection of frequency depends on capacity of furnace. The capacity is smaller, the frequency is higher; The capacity is bigger, the frequency is lower. | The power depends on the weight of melted metal and melting time for one furnace. |
تماس با شخص: Mr. zhang
تلفن: 18810288990
فکس: 86-189-9086-7684
